RADWAG WPT/8B 300C Ramps Bed Scales User Manual
User manual, Medical scales
User manual
Medical scales
User manual no.:
ITKU-16-08-10-13-EN
Personal scales
Bed scales
Chair scales
Baby scales
B A L A N C E S A N D S C A L E S
RADWAG 26 – 600 Radom, Bracka 28, POLAND
Phone: +48 (0-48) 38 48 800, fax. +48 (0-48) 385 00 10
[email protected]
www.radwag.com
This manual is related to the following products:
Table of contents
Document Outline
- 1. INTENDED USE
- 2. PRECAUTIONATY MEASURES
- 3. WARRANTY CONDITIONS
- 4. MAIN DIMENSIONS
- 5. UNPACKING AND ASSEMBLY
- 6. CLEANING
- 7. START UP
- 8. KEYBOARD
- 9. KEYS AND FUNCTIONS
- 10. DISPLAY INDICATIONS
- 11. USER MENU
- 12. WEIGHING
- 13. MAIN SCALE PARAMETERS
- 14. RS 232 PARAMETERS
- 15. OTHER PARAMETRS
- 16. WORKING MODES
- 17. SCALE ADJUSTMENT
- 18. COOPERATION WITH A PRINTER
- 19. COOPERATION WITH A COMPUTER
- 20. COMMUNICATION PROTOCOL
- 20.1. General information
- 20.2. A set of commands recognized by the indicator
- 20.3. Responses format for commands sent from computer level
- 20.4. Command’s description
- 20.4.1. Zero scale
- 20.4.2. Tare scale
- 20.4.3. Give tare value
- 20.4.4. Send stable measurement result in basic measuring unit
- 20.4.5. Immediately send measurement result in basic measuring unit
- 20.4.6. Send stable measurement result in current weighing unit
- 20.4.7. Immediately send measurement result in current measuring unit
- 20.4.8. Switch on continuous transmission in basic measuring unit
- 20.4.9. Switch off continuous transmission in basic measuring unit
- 20.4.10. Switch on continuous transmission in current measuring unit
- 20.4.11. Switch off continuous transmission in current measuring unit
- 20.4.12. Send all implemented commands
- 20.5. Manual printout
- 20.6. Continuous transmission
- 20.7. Printout configuration
- 21. ERROR MESSAGES
- 22. SCALE TECHNICAL PARAMETERS
- 23. TROUBLE SHOOTING
- 24. ADDITIONAL EQUIPMENT
- 25. EMC INFORMATION
- 26. APPENDIX A