RADWAG WLY Scales - Manual (Page 91)

91
24.3. Down-weighing
Software allows to weigh in the “down-weighing” mode. It consist in putting
the load on the pan and taking off/removing portions of it with concurrent
saving weighings equal to the portions taken off the pan.
Procedure:
• Enter parameters group <
Working Modes>
according
to ch. 24 of this manual,
• Enter the required working mode and choose <
Down-weighing>
and then set the required option.
Accessible options:
- Traditional weighing
- Down-weighing mode
24.4. Checkweighing
In case of enabling the checkweighing mode, printouts are performed only
when a weighing is between MIN and MAX thresholds that have been
defined before.
Procedure:
• Enter parameters group <
Working Modes>
according to ch. 24
of this manual,
• Enter the required working mode and choose <
Checkweighing>
then set the required option.
Options:
- Every weighing is recorded
- Only weighings between MIN, MAX are recorded.
24.5. Tare mode
This function enables users to set parameters for tarring.