RADWAG WLY Scales - Manual (Page 124)

124
Edit
Add
Delete
Cancel
• Press “Add” and define a new ingredient of a formulation.
• After specifying all ingredients of a formulation go back to the main
window
by pressing
key.
29.4. Formula making process
Starting the formula making process requires that the authoriztion (access
level) of the logged user is sufficient to start the process.
Notice:
1. Starting the process requires that the logged user has access level at
least of an . If the logged user or anonymous operator have
access level set to then on process start the software displays
a message: .
2. The logging procedure is described in point 11 of this user manual, and
the procedure of determining the acess level for scale users is described
in point 19 of this user manual.
• Press an on-screen button to select a required formulation .
• Enter to scale’s memory gerenal parameters on the working mode
(in accordance with point 29.2of this user manual),
• After returning to the main window of the <
Formulation>
mode
press the on-screen function key (process start),
• If the ingredient control mode is enabled, then the scale software opens
an editing window with a numeric keyboard and
an editing field for entering a correct code of the weighed ingredient
using a barcode scanner. Weighing of each following ingredient
requires giving its corresponding code.