Festo Контроллеры двигателя SFC-LAC - Manual (Page 9)

Contents and general safety instructions
VII
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Intended use
The single−axis field controller (Single Field Controller) type
SFC−LACI−... is used as a position controller and position servo
for the electric drives, types DNCE−...−LAS and DFME−...−LAS.
This manual deals with the basic functions of the SFC−LACI
and the I/O interface of the SFC−LACI−...−IO.
The drives DNCE−...−LAS and DFME−...−LAS and additional
components are documented in separate operating instrucĆ
tions.
The SFC−LACI and the connectable modules and cables may
only be used as follows:
ć As designated
ć Only in industrial applications
ć In faultless technical condition
ć In original condition without modification (only the conĆ
versions or modifications described in the documentation
supplied with the product are permitted).
· Follow the safety instructions and use all the components
and modules as described in the documentation.
· Observe also the standards specified in the relevant
chapters, as well as national and local laws and technical
regulations.
· Observe the maximum values of all additional compoĆ
nents. (e.g. sensors, actuators).