Festo Контроллеры двигателя SFC-LAC User Manual
Page 206
B. Supplementary information
B−44
Festo GDCP−SFC−LACI−IO−EN en 0812NH
CI receive checksum active
CI
20F3h
00h
Var
uint8
rw
Description
When checksum checking is activated, the CI commands to the SFC−LACI must
be provided with a checksum (see Tab. B/2). The checksum is calculated as per
Tab. B/5.
Example: Deactivate checksum: =20F300:0012" (12 = checksum).
The CI terminal integrated into the FCT automatically uses checksums.
Values: 0x00: deactivated (default); 0x01: activated
FCT password
CI
20FAh
01h, 02h
Array
V−string
(r)w
Description
Managing the passwords
FCT password
01h
rw
Password for the FCT software
Value:
<........> (fixed 8 characters, ASCII, 7−bit)
Default:
<00000000> (status upon delivery and after reset)
Super password
02h
w
Entering the super password.
Resets all passwords (FCT password and HMI password, object 20FB).
Contact Festo Service if you require the super password.
Local password
CI
20FBh
00h
Var
V−string
rw
Description
Managing the (local) HMI password to enable certain functions executed via
the control panel.
Value:
<........> (fixed 8 characters, ASCII, 7−bit)
Only the first 3 characters are evaluated.
Default:
<
00000000> (status upon delivery and after reset)