Festo Контроллеры двигателя SFC-LAC - Manual (Page 60)

3. Installation
3−18
Festo GDCP−SFC−LACI−IO−EN en 0812NH
3.6.1 Specifications of the controller interface
I/O specification
Signal level Based on DIN EN 61131, type 1,
positive switching (PNP)
Inputs
Number of digital logic inputs 8
Input current at 24 V input
voltage Typically > 7 mA
Max. permissible input
voltage 30 V DC
Minimum input voltage 0 V DC
Reverse polarity protection Yes
Galvanic isolation Yes
Outputs
Number of digital logic outputs 4
Maximum peak current 0.5 A per output
Overload protection Yes.
Reversed−polarity voltage must
not be appliedĂ!
Tab. 3/9: I/O specification