Festo Контроллеры двигателя SFC-LAC - Manual (Page 236)

B. Supplementary information
B−74
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Drive data
Device control 6510h 43h uint16 rw
Identical to 207Dh.
To enable FCT control after the I/O interface has been switched off, set ENABLE
OPERATION in Control Word as well (object 6040h).
Power supply 6510h 50h int32 rw
Output of power supply unit in [W]. Value range: 0...3000 W. Default: 960 W.
The nominal power rating must be stated exactly. Rounding (e.Ăg. from 960ĂW
to 1000ĂW) is not permitted.
Tool load 6510h 51h uint32 rw
Tool load, e.Ăg. a gripper on the front plate (or piston rod) of the drive.
Controller serial
number
6510h A0h uint32 r
number
Serial number of the controller in format 0xDDMYYSSS:
DD (Day): 8 bits: 0x01...0x1F
M (Month): 4 bits: 0x1...0xC
YY (Year): 8 bits: 0x00...0x63 SSS (Serial number): 12 bits: 0x001...0xFFF