Festo Контроллеры двигателя SFC-LAC - Manual (Page 190)

B. Supplementary information
B−28
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Time stamp
CI 20CAh 01h...10h Array uint32 r
Description Time stamp: Time point of the diagnostic event since device was switched on,
in the time unit as per object 20CCh/02.
Event ... ...
See 20C8h.
Additional information
CI 20CBh 01h...10h Array uint32 r
Description Number of movement cycles at the time a fault comes or goes. See PNU 305
Event ... ...
See 20C8h.
Diagnostic memory administration
CI 20CCh 01h...04h Array uint8 r(w)
Description Configuration of the diagnostic memory
Fault type 01h rw
1 (0x01): Record incoming and outgoing *) faults (default)
2 (0x02) Log only incoming faults
*) Outgoing fault = Acknowledge the fault.
Resolution 02h rw
1 (0x01): Resolution time stamp 10 ms (default)
2 (0x02): Resolution time stamp 1 ms
Clear memory 03h rw
Clear diagnostic memory by writing value = 1.
Read will always reply with value = 1.
Number of entries 04h r
Number of entries in the diagnostic memory