Festo Контроллеры двигателя SFC-LAC - Manual (Page 235)

B. Supplementary information
B−73
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Drive data
Homing switch poĆ
larity
6510h 14h int16 rw
larity
Reference switch type: 0 = N/C contact, 1 = N/O contact
Limit switch deceĆ
leration
6510h 15h int32 rw
leration
Braking in [m/s 2 ] with limit switch signal
Sample input 6510h 16h uint32 rw
Value = 1: Sampling at IN1; value = 2: sampling at IN2
Brake delay time
switch on
6510h 17h uint16 rw
switch on
Brake: Switch on delay, see section 5.5.6
Brake delay time
switch off
6510h 18h uint16 rw
switch off
Brake: Switch−off delay, see section 5.5.6
Automatic brake
time
6510h 19h uint16 rw
time
Brake: Activation time, see section 5.5.6
PWM delay 6510h 1Ah uint16 rw
PWM delay, see sections 5.5.5 and 5.5.6.
Output stage
temp
6510h 31h int16 r
temp.
Temperature of the SFC−LACI output stage. Range: −20...+120 °C
Output stage
max temp
6510h 32h int16 r
max. temp.
Highest temperature measured to date for the SFC−LACI, in °C. Stored in
EEPROM.
Output stage
lower threshold
6510h 33h uint16 rw
lower threshold
temp Lower temperature threshold for SFC−LACI: 80 °C
When this temperature is reached, a warning is triggered.
Output stage
upper threshold
6510h 34h uint16 rw
upper threshold
temp Upper temperature threshold for SFC−LACI: 85 °C. When this temperature is
reached, an error message is triggered. Restart only after the temperature has
dropped below the lower threshold (see subindex 33h).
Max. current 6510h 41h uint16 rw
Identical to 6073h.