3 before switching on, Before switching on – Festo Контроллеры двигателя SFC-LAC User Manual

Page 87

5. Commissioning

5−5

Festo GDCP−SFC−LACI−IO−EN en 0812NH

5.1.3

Before switching on

When the SFC−LACI is switched on, the controller interface is
activated as standard [HMI= off ].

Caution
Unexpected movements of the drive due to incorrect or
incomplete parametrising

Make sure that there is no active ENABLE signal on the
controller interface when switching on the SFC−LACI.

Parametrise the entire system completely before
activating the controller with ENABLE or [HMI = on].