Samsung SM-N900TZKETMB - Manual (Page 136)

129
Enabling Share Shot
Share shot is a Wi-Fi Direct group sharing feature where
multiple users can Wi-Fi connect their devices and then all
share each others pictures in real-time. This is really useful
in group events (ex: family gathering or company party)
where you don’t want to have to email everyone later and
make sure you all can share your pics at a later date.
For more information, refer to “Wi-Fi Direct Setup and
Settings” on page 230.
The general process is:
• Enable Wi-Fi Direct communication
• Pair your device with other users
• Enable Share shot
To enable Wi-Fi Direct:
Important! The target device must already be connected to the
same Wi-Fi and have its Wi-Fi Direct feature active
and scanning before you can your pairing.
1. From the main Settings page, tap Connections tab ➔
Wi-Fi.
2. In a single motion touch and slide the Wi-Fi slider to the
right to turn it on. The slider color indicates the
activation status.
3. Tap Wi-Fi Direct.
4. Tap Scan and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap Multi-connect ➔ Scan and select all the device
names to begin the connection process to these Wi-Fi
Direct compatible devices.
Note: The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
5. Tap Done. The direct connection is then established.
Confirm appears in the Status bar.
6. When prompted to complete the connection, the
recipient should tap OK. Your status field now reads
“Connected” and your connected device is listed within
the Wi-Fi Direct devices listing.