ADC SG-1 - Manual (Page 91)

June 30, 2006 Chapter 7: Second Level Commands
SG1-UM-8500-03 7-11
Using no interface VLAN command
This command deletes a VLAN definition for the Ethernet interface.
Usage
no interface vlan \ < id>
Parameter(s)
This is the slot number of the physical card.
This is the port number of the card (1 or 2).
This is the VLAN interface identifier; valid number range is 1 to 4095.
Example(s)
A UTHENTICATION C OMMANDS
Using the password pre-authentication command
This command defines the system pre-authentication password.
Usage
password pre-authentication
For options, see Table 4-1, “Default Username/Password,” on page 4-1 .
Host(config)# no interface vlan
Host(config)# no vlan 3 1\1
Host(config)# password pre-authentication