ADC SG-1 - Manual (Page 129)

June 30, 2006 Chapter 7: Second Level Commands
SG1-UM-8500-03 7-49
Using the ip dhcp relay information option command
The ip dhcp relay information option command enables the system to insert a DHCP relay agent information option
in forwarded BOOT REQUEST messages to the DHCP server.
Usage
ip dhcp relay information option \
ber>\[sub-interface number]
Parameter(s)
Table 7-12. ip dhcp relay information parameters
Example(s)
Using the no ip dhcp relay information option command
Usage
no ip dhcp relay information option \
number>\[sub-interface number]
For parameters and examples, see “Using the ip dhcp relay information option command” .
Host(config)# ip dhcp relay information option
Parameter Description Legal values / range
Physical port number. 1 - 2
Sub interface number. 1- 4095
DHCP server priority. 1- 10
Host(config)# no ip dhcp relay server Ethernet 0 \ 1 2
Host(config)# no ip dhcp relay server Atm 2 \ 1 \ 33 5
Host(config)# no ip dhcp relay server VLAN 1 \ 2 3 5
Host(config)# no ip dhcp relay server Default 0 \ 1 \ 4 8
Host(config)# no ip dhcp relay information option