ADC SG-1 - Manual (Page 157)

June 30, 2006 Chapter 7: Second Level Commands
SG1-UM-8500-03 7-77
Examples
Configure
Usage
(config-debug)# sysLog-server-ip
Parameter
It is the SysLogger IP address.
Usage
(config-debug)# exit
This command will cause exit current configuration level.
Example
(config-debug)# trace default on (cr)
(config-debug)#
(config-debug)# trace default off (cr)
(config-debug)#
(config-debug)# sysLog-server-ip
(config-debug)# exit
(config-debug)# exit
Host>
(config-debug)# end