ADC SG-1 - Manual (Page 135)

June 30, 2006 Chapter 7: Second Level Commands
SG1-UM-8500-03 7-55
Deleting an IP route line
This command deletes the existing route.
Usage
no ip route [nip]
Parameter(s)
Table 7-15. no ip route command parameters
Example(s)
Using the ip default-gateway command
Use this command to specify the system’s default gateway.
Usage
ip default-gateway
Parameter(s)
The IP address of the default gateway.
Example(s)
Using the no ip default-gateway command
Use this command to specify the system’s default gateway.
Host(config)# ip route 192.168.1.0. 255.255.255.0 192.168.1.2
Host(config)# no ip route
Parameter Description Values
[nip] Native IP Valid IP or Network
Destination IP or network Valid IP or Network
Network mask Valid Mask (Except to 0.0.0.0)
Next-hop IP address Valid IP address
Host(config)# no ip route 192.168.0.0 255.255.0.0 192.168.0.1
Host(config)# ip default-gateway
Host(config)# ip default-gateway 12.3.11.56
Host(config)# no ip default-gateway