Igmp commands, Using the ip igmp proxy command, Igmp commands -51 – ADC SG-1 User Manual
Page 131: Table 7-13.ip igmp proxy command parameters -51, Igmp c
Chapter 7: Second Level Commands
7-51
IGMP C
OMMANDS
Using the ip igmp proxy command
The ip igmp proxy upstream-interface command enables the IGMP Proxy capabilities on a specific upstream
interface. When the upstream interface is not configured, the system does not support the IGMP proxy capability.
Additionally, the command enables you to add or change the IGMP Proxy upstream interface.
Usage
ip igmp proxy upstream-interface
[\sub-interface]
Table 7-13. ip igmp proxy command parameters
Example(s)
Using the no ip igmp proxy command
The no igmp proxy upstream-interface command disables the IGMP Proxy capabilities.
Usage
no igmp proxy upstream-interface
[\sub-interface]
Host(config)# ip igmp proxy upstream-interface
Note:
Only routed ATM interfaces are allowed to be upstream interface.
Parameter
Description
Legal values/range
PMC slot number.
0 - 1
Physical port number.
1 - 2
Sub interface number.
1- 4095; Default value 0
Host(config)# ip igmp proxy upstream-interface Ethernet 0 \ 1
Host(config)# ip igmp proxy upstream-interface Atm 2 \ 1 \ 3
Host(config)# ip igmp proxy upstream-interface VLAN 1 \ 2 54
Host(config)# no ip igmp proxy upstream-interface