ADC SG-1 - Manual (Page 62)

Chapter 6: First-Level Commands June 30, 2006
6-26 SG1-UM-8500-03
Displaying show mpls l2transport vc commands
It shows confine redirected interface traffic through MPLS l2vpn tunnel based on Martini draft.
Example(s)
Displaying a list of available write commands
This command shows the available write commands enabled on the SCC.
Usage
write [] | [] | []
Parameter(s)
Writes running configuration (volatile memory) to start-up configuration (non-volatile).
Writes running configuration to a TFTP server.
IP address of TFTP server.
Name to be used for configuration saved to a TFTP server.
Writes running configuration to terminal screen.
Host> show mpls l2transport vc
Host> show mpls l2transport vc
Dest address VC ID Status Type
194.90.1.4 200 UP redirect
194.90.1.4 201 UP redirect
Host> write ?