ADC SG-1 - Manual (Page 141)

June 30, 2006 Chapter 7: Second Level Commands
SG1-UM-8500-03 7-61
Usage
no ip ospf interface \
[\] authentication-key
For parameters and examples, refer to “Using the ip ospf interface authentication-key command” .
Using the ip ospf interface message-digest-key command
This command configures the OSPF MD5 (Message Digest 5) authentication parameters.
Usage
ip ospf interface \
[\] message-digest-key md5
Parameter(s)
This is the MD5 identifier to be used by neighboring OSPF routers.
This is the MD5 password (1 to 16 alphanumeric characters).
For additional parameters, refer to “Using the ip igmp proxy command” on page 7-51 .
Example(s)
Using the no ip ospf interface message-digest-key command
This command removes the OSPF MD5 (Message Digest 5) authentication parameters.
Usage
no ip ospf interface \
[\] message-digest-key
For parameters and examples, refer to “Using the ip ospf interface message-digest-key command” on page 7-61 .
Host(config)# no ip ospf interface ... message-digest-key
Host(config)# ip ospf interface Ethernet 1 \ 2 message-digest-key 25 md5 jkljlll
Host(config)# no ip ospf interface ... message-digest-key