ADC SG-1 - Manual (Page 148)

Chapter 7: Second Level Commands June 30, 2006
7-68 SG1-UM-8500-03
Table 7-17. vrrp command parameters
The following examples use two SCCs (Service Creation Cards):
Example 1 (SCC1 configuration):
Example 2 (SCC2 configuration):
The following two examples show the configuration with preemption capabilities:
Parameter Description Legal values/range
The interface should be Ethernet or
VLAN. Ethernet, VLAN
Slot number. 0, 1
Physical port number. 1 to 3
VLAN ID number.
Virtual Router Group Number (VRID). 1 to 15
IP address IP address of the virtual router. Legal IP address
VRRP router priority value. 1 to 254
VRRP preemptive mode. On or off (default value is off)
Host(config)# vrrp interface Ethernet 0\1 1 ip 192.168.1.3 priority 200
Host(config)# vrrp interface Ethernet 0\1 1 ip 192.168.1.3 priority 100