ADC SG-1 - Manual (Page 211)

June 30, 2006 Appendix B: Redirection Server
SG1-UM-8500-03 B-17
Parameter
It is an Alpha community numeric string.
Example:
U SING R ESET C ONFIGURATION C OMMAND
• The reset configuration command deletes the RDS stored configuration.
• It is located at the “ADC” menu.
Usage
reset configuration
HTTP C OMMANDS
Using http-proxy-server port command
• The http-proxy-server port command defines the supported Http-proxy server posts in the system.
• The command is located in the “configure terminal” menu.
• The total available http-proxy-server ports are 3.
RDSHost(config)> SNMP-server community set test
RDSHost(config)> end
RDSHost> write terminal
...
SNMP-server community set test
...