User: ssc-host sub-attribute, User: service-name sub-attribute – ADC SG-1 User Manual
Page 168
![background image](/manuals/41881/168/background.png)
Appendix A: SG-1 Vendor-Specific Attributes
A-10
General:
Format:
adc-avpair = "user:action= user_space_overwrite_on_next_service >">", Example: adc-avpair = "user:action=Reject", user: SSC-host sub-attribute This vendor-specific sub-attribute contains the SSC (Service Selection Center) host IP address at which the user General: Format: adc-avpair = "user:SSC-host= Example: adc-avpair = "user:SSC-host=194.90.1.15", user: service-name sub-attribute This vendor-specific sub-attribute contains the service name given to the connected peer. The user:service-name Operation Mode: Access-Accept message Vendor-type: 14 Vendor-length = 2 + 11 + (4-12) Operation Mode: Access-Request message Vendor-type: 15 Vendor-length = 2 + name length + 7-15
activated the service. By sending this information, the system gives the RADIUS a hint as to the SSC IP address.
This is used for authorization purposes. This sub-attribute is used only in service authentication requests.
sub-attribute represents the service of the currently received attributes. It is a hint given by the RADIUS. When sent
by the POPmaestro in an access-request message it implies the service requested by the user.
Service-Accept message
Service-Request message