Dhcp:opt82-relay-remote-id sub-attribute, Dhcp:discover-action sub-attribute – ADC SG-1 User Manual
Page 175
Appendix A: SG-1 Vendor-Specific Attributes
A-17
dhcp:opt82-relay-remote-id sub-attribute
The dhcp:opt82-relay-remote-id attribute contains the received option 82 relay remote ID sub-option, while each
byte information is in hexadecimal format.
General:
Format:
adc-avpair = "dhcp:opt82-relay-remote-id=
Example:
adc-avpair = "dhcp:opt82-relay-remote-id=01844400660300",
dhcp:discover-action sub-attribute
The dhcp:discover-action attribute defines the action to be taken when a new dhcp discover message is transmitted
in a connected session. The discover actions are:
a.
update - The system is not disconnecting the session on a new dhcp discover message and updates it with
the new configured IP address.
b.
normal - The system disconnects the session on a new dhcp discover message, which is the system normal
behavior.
General:
Format:
adc-avpair = "dhcp:discover-action=
Example:
adc-avpair = "dhcp:discover-action=update",
Operation Mode:
Access-Accept message
Service-Accept message
Vendor-type:
31
Vendor-length =
2 + name length + (1 - 255)
Operation Mode:
Access-Accept message
Service-Accept message
Vendor-type:
32
Vendor-length =
2 + 6 + name length