ADC SG-1 - Manual (Page 85)

June 30, 2006 Chapter 7: Second Level Commands
SG1-UM-8500-03 7-5
Table 7-2. Ethernet Operating Mode
Usage
no interface Ethernet \
Parameter(s)
This is the interface slot number you want to configure.
This is the physical port number you want to configure.
Example(s)
Value Explanation
10 H 10M half-duplex
10 F 10M full-duplex
100 H 100M half-duplex
100 F 100M full-duplex
1000 H 1000M half-duplex
1000 F 1000M full-duplex
auto auto sensing
Host(config)# no interface Ethernet
Host(config)# no interface Ethernet 0\1