ADC SG-1 - Manual (Page 216)

Appendix B: Redirection Server June 30, 2006
B-22 SG1-UM-8500-03
U SING N O EDS-URL-IDENTITY C OMMAND
• The no eds-url-identity command deletes the eds name configuration to be used in the EDS URL. The system
uses its default value (system primary IP address).
• The command is located in the “configure terminal” menu.
Usage
no eds-url-identity
Example 1:
IP-IN-IP C OMMANDS
Using remote-ip-in-ip command
• The remote-ip-in-ip command defines the remote endpoints in which the system should return the traffic
through an ip-in-ip tunnel.
• The command is located in the “configure terminal” menu.
• The maximum number of remote ip-in-ip endpoints is 32.
Usage
remote-ip-in-ip
Parameter
It is the remote ip-in-ip endpoint IP address.
RDSHost(config)> no eds-url-identity redirect_test
RDSHost> write terminal
...
When the remote-ip-in-ip is not defined, the system returns the traffic to the users without ip-in-ip
encapsulation (as done today).