ADC SG-1 User Manual
Page 162
Appendix A: SG-1 Vendor-Specific Attributes
A-4
33
nip-pipe-next-hop
route
72
V7.0
Defines the next-hop router to be
used for the traffic destined to a
native IP user.
34
advertise-
protocol
route
73
V7.0
Defines the routing protocol to be
use to advertise the session IP
address.
35
forward-addr
route
74
V90
Defines the forwarding address.
36
acl-tcp-nat-
redirect
route
75
V90
Defines a destination IP address to
which the system should TCP
redirect all session packets.
37
tunnel-id
vpdn
80
V5.0
Defines the tunnel ID, used for LAC
purpose.
38
l2tp-tunnel-
password
vpdn
81
V5.0
Contains a password to be used to
authenticate to a remote server.
39
ip-address
vpdn
82
V5.0
Contains the address of the server
end of the tunnel.
40
tunnel-
assignment-id
vpdn
83
V5.0
Indicate to the tunnel initiator the
particular tunnel to which a session
is to be assigned.
41
tunnel-client-ip-
address
vpdn
84
V5.0
Contains the address of the initiator
end of the tunnel (LAC IP address).
42
nativeip
vpdn
85
V7.0
Defines a session as a native IP
pipe, means the session acts as
tunnel for native IP traffic.
43
ip-tunnel
vpdn
86
V7.0
Defines the tunneling protocol and
the destination tunneling server IP
address, which all the session data
should be tunneled to.
44
up-mean-rate
qos
90
V5.0
Specifies the average number of
bits per second allowed by the user
in the upstream direction.
45
down-mean-rate
qos
91
V5.0
Specifies the average number of
bits per second allowed by the user
in the downstream direction.
46
acl-up-mean-rate
qos
92
V7.0
Specifies the average number of
bits per second allowed to the user
in the upstream direction per a
specified access list.