ADC SG-1 - Manual (Page 100)

Chapter 7: Second Level Commands June 30, 2006
7-20 SG1-UM-8500-03
Configuring a single PVC
This command creates a permanent virtual circuit (PVC) on an ATM interface.
Usage
atm pvc [name ] | [ OAM
| ubr ]
Parameter(s)
The virtual path identifier (valid values 0 - 255).
The virtual channel identifier (valid values 32 - 2032).
The value 2 is required to select the SONET/SDH interface.
The port on which the circuit is to be created (valid values 1 and 2).
A logical interface number that can be used to group circuits (valid values 1 - 2000).
[name ]
A 1 to 64 character alpha-numeric identifier that can be assigned to a circuit for tracking purposes.
Host(config)# atm pvc