HP StorageWorks 3000 RAID Array - Manual (Page 83)

Using Command Console 3-37
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:
Part Number: AA-RBF2C-TE File Name: d-ch3 Using Command Console.doc Last Saved On: 12/5/00 10:20 AM
2. Click the Settings tab to access the setting property sheet (Figure 3– 34).
You can change the logical unit number (LUN) or enable/disable
writeback cache. Select a new LUN from the Drop-down menu. Click
the checkbox to Enable writeback cache. To apply the LUN change you
must restart the controller. Click the OK button to save the changes and
exit.
Figure 3-34. Virtual disk properties Settings tab