HP StorageWorks 3000 RAID Array - Manual (Page 26)

1-10 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:
Part Number: AA-RBF2C-TE File Name: b-ch1 Introduction.doc Last Saved On: 12/4/00 12:10 PM
Hardware and Software Requirements
The minimum requirements to properly run Command Console are listed in
Table 1-6.
Table 1-6
Minimum Hardware and Software Requirements
Item Requirements
Management station Intel 486/66 MHz with 16 MB of RAM memory and 10-MB
free hard disk space.
Operating system Windows NT 4.0 SP4 and Windows 2000.
Monitor VGA at 800x600 resolution.
Modem Hayes-compatible (for event notification).
Serial port RS-232 (for local connection).
Network adapter See Chapter 2 “ Installing and Setting Up the Command
Console Client”
Controller compatibility The RAID Array 3000 controller (HSZ22).
Host software ASPI SCSI driver required for host port virtual terminal
connection.