HP StorageWorks 3000 RAID Array - Manual (Page 37)

Installing and Setting Up the Command Console Client 2-11
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:
Part Number: AA-RBF2C-TE File Name: c-ch2 Installing and Setting Up the Command Client.doc Last Saved On: 12/5/00 10:31 AM
1. Select the Redundant Array of Independent Disks (RAID) level, and
then click Next. This selection will determine the type of virtual disk
that you will create. In this example, we will create a RAID 5 virtual
disk and partition it into two RAID 5 virtual disks of approximately
equal capacity.
Figure 2-6. Virtual disk wizard step 1