Available connections – HP StorageWorks 3000 RAID Array User Manual

Page 24

1-8 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:

Part Number: AA-RBF2C-TE File Name: b-ch1 Introduction.doc Last Saved On: 12/4/00 12:10 PM

Available Connections

Features and limitations of the available connections must be considered in
choosing a connection to use for Client and your subsystems. Each connection
differs in the type of features and limits. Table 1-5 lists features that are
offered by each connection.

Table 1-5

Features of Connections Supported by the RA3000

Connection
Type

Create
Virtual Disk

Delete
Virtual Disk

Fault Events:
Client Visual
Notification

Fault
Events:
Paging
Notification

Fault Events:
Event
Logging

Local serial
connection

(navigation tree
and agent not
used)

Supported

Not
supported

Not supported

Local SCSI bus
connection

(navigation tree
and agent not
used)

Supported

Not
supported

Not supported

Remote network
connection

(client and agent
on different
computers

remote network
connection)

Supported

NOTE: You can reconfigure the storage subsystems by using SWCC. For the operating
system to properly reflect these changes, you may need to take action outside the scope
of SWCC, such as initializing the drive or restarting the system. For further information,
refer to the operating system documentation.