HP StorageWorks 3000 RAID Array - Manual (Page 92)

3-46 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:
Part Number: AA-RBF2C-TE File Name: d-ch3 Using Command Console.doc Last Saved On: 12/5/00 10:20 AM
Defining a User Profile
1. From the Options menu, click Event Notification, then User Profiles.
2. Click the New button and enter a name on the General tab. A
description is optional. Use Edit to make changes to an existing profile.
3. Select the Pager tab.
4. Click the Enabled checkbox (Figure 3– 41).
Figure 3-41. Pager tab configured for a numeric pager
5. If you have a numeric pager, enter its phone number in the Pager
number: box.
6. If you have an alphanumeric pager, enter service provider’s TAP phone
number in the Pager number: box. Click the Alphanumeric checkbox
and enter the pager identification number in the Identification Number:
box.
7. Enter the start and end times in HH:MM, 24-hour format. For example,
08:00 as start and 17:00 as end. Leave both fields set to 00:00 if you
want to be notified 24 hours a day.