HP StorageWorks 3000 RAID Array - Manual (Page 82)

3-36 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:
Part Number: AA-RBF2C-TE File Name: d-ch3 Using Command Console.doc Last Saved On: 12/5/00 10:20 AM
Modifying Virtual Disks
You can modify the characteristics of your virtual disks in two ways: you can
change its operating characteristics or remove members.
CAUTION: The virtual disks in your storage subsystem are logical containers
that hold your user data. Use extreme caution when modifying the
characteristics of a virtual disk. You may be putting valuable, user data at risk.
Changing Virtual Disk Operating Parameters
You can change the operating parameters of any of your virtual disks by
accessing their property sheets.
1. Double-click the icon of any virtual disk to access its property sheets.
The first sheet displayed is the General tab (Figure 3– 33). This tab is
informational and lists the characteristics of the virtual disk.
Figure 3-33. Virtual disk properties General tab