HP StorageWorks 3000 RAID Array - Manual (Page 51)

Using Command Console 3-5
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:
Part Number: AA-RBF2C-TE File Name: d-ch3 Using Command Console.doc Last Saved On: 12/5/00 10:20 AM
If you select StorageWorks Command Console, the first window you will see
is the Navigation window (Figure 3– 3). The Navigation window allows you to
monitor many subsystems over the TCP/IP network. You can also use the
Navigation window to open a Storage window.
Figure 3-3. StorageWorks Command Console Navigation window
Choosing a Connection Method
The HSZ22 client offers three ways to connect to your storage subsystem:
Over the controller’s serial port, the SCSI bus or over a TCP/IP network. The
serial port and SCSI bus connections are local connections and allow you to
connect to only one storage subsystem. You can connect to one or many
storage subsystems by using a TCP/IP network connection.