HP StorageWorks 3000 RAID Array - Manual (Page 62)

3-16 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:
Part Number: AA-RBF2C-TE File Name: d-ch3 Using Command Console.doc Last Saved On: 12/5/00 10:20 AM
Adding a System to the Navigation Tree
When you add a system to the Navigation Tree, you are telling the client
software to monitor that system. Before you add a system to the Navigation
Tree, you need to have the agent software already installed on that system and
the name of your client system on the agent’s list of client system entries.
Add a system to the Navigation Tree as follows:
1. From the File menu, click Add System.
2. Enter your host’s name or your host’s IP address in the Host Name or
TCP/IP Address: text box (Figure 3– 13) and click Apply.
Select Add System from the File menu.
Enter the host name and click Apply.
Figure 3-13. Adding an agent system to the Navigation Tree