HP StorageWorks 3000 RAID Array - Manual (Page 46)

2-20 Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide
Compaq Confidential – Need to Know Required
Writer: Bob Young Project: Command Console V2.2 for the RAID Array 3000 (Pedestal and Rack Mount Models) User’s Guide Comments:
Part Number: AA-RBF2C-TE File Name: c-ch2 Installing and Setting Up the Command Client.doc Last Saved On: 12/5/00 10:31 AM
Figure 2-17 shows an example of the system added to the Navigation Tree.
Figure 2-17. System added to the Navigation Tree
Fault Notification by Pager (TCP/IP
Network Connections)
You can set up Command Console so that it notifies you by a page when a
critical event occurs. This function will work with alphanumeric and numeric
pagers. You can configure this function so that it sends pages to numerous
people at different times. For example, if you have several people, who
monitor the network in shifts, you can configure this function so that the
software only pages the person, who is currently working.
For more information on how to set up the pager notification, see “ Setting Up
Pager Notification” in Chapter 3 “ Using Command Console” . You can also
find information about paging in the online Help. You can access this section
quickly by going to the index entry, monitoring, faults using pagers, in the
online Help.
CAUTION: To receive pages, the following must occur:
■ The Asynchronous Event Service (AES) must be running.
■ The Agent service must be running.
■ In the Agent’s list of client system entries, you must select the TCP/IP
notification scheme for your client system.