Syntax, Keywords, Examples – HP MPX200 Multifunction Router User Manual

Page 93

Syntax

migration

Keywords

Acknowledges a completed data migration job. After running the command with this option, the
migration job is permanently deleted from the database.

acknowledge

Schedules a data migration job. You can enter a name for the data migration job and associate
it with a job group. Scheduling options include: immediately, at a pre-defined later time, or by

add

serial scheduling. Serial scheduling requires that you assign a priority to the job that is used to
schedule it before (lower priority value) or after (higher priority value) a specific job in the serial
schedule queue of data migration jobs.

Pauses a running migration job. This keyword freezes the migration process. You can later resume
the job from the block where the migration was paused.

pause

Resumes a paused data migration job. The job is resumed from the block where the data migration
was paused.

resume

Deletes a data migration job.

Deletes migration jobs that are owned by the peer blade while the peer blade is down. If the
peer blade is up and running, this keyword does not allow job deletion.

rm_peer

Restarts a previously stopped migration job. The migration process starts over from the first block.

start

Stops running the data migration job. Use this command if you want to later restart the migration
process due to some technical or business need. You can also use it on already scheduled jobs
to change the scheduling time.

stop

Examples

The following example shows the migration acknowledge command for an offline data
migration job:

MPX200 <1> (miguser) #> migration acknowledge
Job Type Status Job Description
ID
--- ---- ------------------------ ------------------------------------
0 Offline Completed (100%) HP HSV200-0:LUN1 to DGC RAID-1:LUN0

Please select a Job Id from the list above ('q' to quit): 0

The following example shows the migration add command used to configure an offline data
migration job:

MPX200 <1> (miguser) #> migration add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.

Migration Type [ 1=Offline (Local/Remote),
2=Online (Local),
3=Online (Remote) ] [ ] 1
1
Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type
----- -------------------------------- -------------------- -------------
0 50:00:1f:e1:50:0a:e1:49, 8c-02-00 HP HSV200-0 Src+Dest
1 50:00:1f:e1:50:0a:37:18, 82-04-00 HP HSV210-2 Src+Dest
2 50:06:01:62:41:e0:49:2e, 82-01-00 DGC RAID-2 Src+Dest
3 iqn.2001-05.com., 30.30.30.2 EQLOGIC 100E-00-7 Src+Dest
4 iqn.2001-05.com., 30.30.30.2 EQLOGIC 100E-00-8 Src+Dest
5 50:0a:09:82:88:8c:a7:79, 61-12-00 NETAPP LUN-3 Src+Dest

Please select a Source Target from the list above ('q' to quit): 0

Index (VpGroup Name)
----- --------------
1 VPGROUP_1

Please select a VPGroup for Source Lun ('q' to quit): 1
LUN Vendor LUN Size(GB) Attributes Serial Number/WWULN
--- ------ -------------- ---------- -------------------
1 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:07:59:a4:00:02:d0:00:00:8d:00:00
2 HP 10.00 PB5A8C3AATK8BW
60:05:08:b4:00:07:59:a4:00:02:d0:00:00:90:00:00
3 HP 12.00 PB5A8C3AATK8BW

Commands