HP MPX200 Multifunction Router - Manual (Page 103)

MPX200 <1> (admin) #> reset mappings
Are you sure you want to reset the mappings in the system (y/n): y
Please reboot the System for the settings to take affect.
save capture
Captures the system log that you can use to detect and troubleshoot problems when the MPX200
is exhibiting erroneous behavior. This command generates a System_Capture.tar.gz file that
provides a detailed analysis.
Authority
admin
Syntax
save capture
Examples
The following example shows the save capture command:
MPX200 <1> (admin) #> save capture
Debug capture completed. Package is System_Capture.tar.gz
Please use FTP to extract the file out from the System.
scrub_lun
Manages data scrubbing jobs, including scheduling, starting, stopping, pausing, resuming, and
deleting jobs, as well as acknowledging completed jobs.
Authority
miguser
Syntax
scrub_lun
Keywords
Acknowledges the completed scrub job. acknowledge
Creates a data scrubbing job to “scrub” (wipe out data from) the LUN using four scrubbing
algorithms. add
Pauses the running scrub job. pause
Resumes the paused scrub job. resume
Deletes the scrub job. rm
Removes the scrub job from the peer blade when the owner blade is not up. rm_peer
Starts a stopped scrub job. start
Stops the running scrub job. stop
Examples
The following example shows the scrub_lun acknowledge command:
MPX200 <1> (miguser) #> scrub_lun acknowledge
Job Type Status Job Description
nl
ID
--- ---- ------------------------ -------------------------------------
0 Scrubbi.. Completed HP HSV200-0:VPG1:004
Please select a Job Id from the list above ('q' to quit): 0
All attribute values for that have been changed will now be saved.
Commands 103