Using the scrubbing lun wizard – HP MPX200 Multifunction Router User Manual
Page 71
Figure 35 Viewing data management LUN information
After using the DML for data migration, you should release (remove) it. You cannot remove the
master DML (the first DML created) until all other DMLs are removed. That is, to remove all DMLs,
you must remove the master DML last.
To remove a DML in HP mpx Manager:
1.
On the Wizards menu, click Remove Data Management LUN.
Or, in the router tree pane, right-click a blade, and then click Remove Data Management LUN
to remove a DML from the selected blade.
nl
2.
Complete the Remove Data Management LUN Wizard as follows:
a.
Select one or more DMLs by selecting the check box to the left of each.
b.
Click OK to save your changes and close the wizard.
Using the Scrubbing LUN wizard
The scrubbing LUN wizard helps you configure scrubbing jobs to destroy data residing on the
LUN. This feature is primarily used to erase confidential information on the LUN. Ensure that the
information will no longer be used or read by any application.
The scrubbing LUN wizard is generally the same as the Data Migration wizard, see
data migration wizard” (page 55)
. However, you must select only source LUNs on the Create LUN
Scrubbing Job dialog box.
shows an example.
Using the Scrubbing LUN wizard
71