HP MPX200 Multifunction Router - Manual (Page 100)

migration_report
Saves and uploads data migration reports in several file formats. To see example output from a
generated migration report, see
“Generating a data migration report” (page 73) .
Authority
miguser
Syntax
migration_report
Keywords
Saves data migration report files. save
Uploads the data migration report files to a server. upload
Notes
To generate a data migration report:
1.
On the MPX200, issue the migration_report save command.
nl The generated report is saved in the /var/ftp folder of the blade where the command is
issued.
2. From a Windows or Linux machine, FTP to the MPX200 blade’s IP address where the report
was generated, and then get the report file named Migration_report.tar.gz.
Examples
The following example shows the migration_report save command:
MPX200 <1> (miguser) #> migration_report save
Successfully saved migration report. Package is Migration_Report.tar.gz
Please use FTP to extract the file out from the System.
The following example shows the migration_report upload command:
MPX200 <1> (admin) (miguser) #> migration_report upload
Migration report uploaded successfully on
http://172.35.14.183/put.php.
readjust_priority
Modifies the priority of serial scheduled jobs. Use this feature if you have more than 256 jobs that
must be executed sequentially. This operation is allowed only if the high priority jobs are completed,
and there is room for shifting the priority values on already configured jobs. This readjustment
reduces the priority value of the last job from 256 by the value of the priority of the currently running
serial job, and makes room to configure more serial jobs.
Authority
miguser
Syntax
readjust_priority
Examples
The following shows an example of the readjust priority command.
MPX200 <1> (miguser) #> readjust_priority
nl
Are you sure you want to adjust the priorities of serially
scheduled jobs that haven't started (y/n): y
nl
100 Command line interface