Show fc, Show features, Show fc show features – HP MPX200 Multifunction Router User Manual
Page 116
Lun Type DRL [Master DML]
DML State Active
Owner Serial Number 0834E00021
Creator Blade Id 1
Array Symbolic Name IBM 1814-0
Lun VPG:ID 1:6
LUN WWULN 60:0a:0b:80:00:2a:3f:78:00:00:67:e7:4c:fe:b4:22
LUN State Online
Free/Total Metadata Extents 8192/8192
Free/Total Data Extents 49/49
show fc
Displays the port status, link status, port name, and node name for each FC port.
Authority
guest
Syntax
show fc
Examples
The following example shows the show fc command:
MPX200 <1> #> show fc
FC Port Information
---------------------
FC Port FC1
Port Status Enabled
Port Mode FCP
Link Status Up
Current Link Rate 8Gb
Programmed Link Rate Auto
WWNN 20:00:00:c0:dd:13:2c:60 (VPGROUP_1)
WWPN 21:00:00:c0:dd:13:2c:60 (VPGROUP_1)
Port ID 8c-0a-00 (VPGROUP_1)
WWNN 20:01:00:c0:dd:13:2c:60 (VPGROUP_2)
WWPN 21:01:00:c0:dd:13:2c:60 (VPGROUP_2)
Port ID 8c-0a-01 (VPGROUP_2)
WWNN 20:02:00:c0:dd:13:2c:60 (VPGROUP_3)
WWPN 21:02:00:c0:dd:13:2c:60 (VPGROUP_3)
Port ID 8c-0a-02 (VPGROUP_3)
WWNN 20:03:00:c0:dd:13:2c:60 (VPGROUP_4)
WWPN 21:03:00:c0:dd:13:2c:60 (VPGROUP_4)
Port ID 8c-0a-04 (VPGROUP_4)
Firmware Revision No. 5.01.03
Frame Size 2048
Execution Throttle 256
Connection Mode Point-to-Point
SFP Type 8Gb
FC Port FC2
Port Status Enabled
Port Mode FCP
Link Status Up
Current Link Rate 8Gb
Programmed Link Rate Auto
nl
WWNN 20:00:00:c0:dd:13:2c:61 (VPGROUP_1)
WWPN 21:00:00:c0:dd:13:2c:61 (VPGROUP_1)
Port ID 8c-0d-00 (VPGROUP_1)
WWNN 20:01:00:c0:dd:13:2c:61 (VPGROUP_2)
WWPN 21:01:00:c0:dd:13:2c:61 (VPGROUP_2)
Port ID 8c-0d-01 (VPGROUP_2)
WWNN 20:02:00:c0:dd:13:2c:61 (VPGROUP_3)
WWPN 21:02:00:c0:dd:13:2c:61 (VPGROUP_3)
Port ID 8c-0d-02 (VPGROUP_3)
WWNN 20:03:00:c0:dd:13:2c:61 (VPGROUP_4)
WWPN 21:03:00:c0:dd:13:2c:61 (VPGROUP_4)
Port ID 8c-0d-04 (VPGROUP_4)
Firmware Revision No. 5.01.03
Frame Size 2048
Execution Throttle 256
Connection Mode Point-to-Point
SFP Type 8Gb
show features
Lists available features and shows the current license status of each.
116
Command line interface