HP MPX200 Multifunction Router - Manual (Page 86)

LUN ID :- 0001000000000000
STATUS :- 0
SCSI STATUS :- 0
CDB :- 12000000ff0000000000000000000000
DATA TRANSFER LENGTH :- 32768
RESIDUE TRANSFER LENGTH :- 32516
ACTUAL DATA LENGTH :- 252
DATA :-
00 00 05 12 f7 30 00 32 48 50 20 20 20 20 20 20
48 53 56 32 31 30 20 20 20 20 20 20 20 20 20 20
35 30 30 30 41 32 39 39 41 53 5a 30 32 34 42 35
41 37 41 54 4c 38 34 42 00 00 00 62 0d 80 13 20
08 c0 03 00 03 24 01 60 01 c0 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 3e 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 05 50 00 1f e1 50 0a 37 10 50 00 1f e1 50 0a
37 1d 20 30 00 00 00 00 00 00 35 30 30 30 31 46
45 31 35 30 30 41 33 37 31 30 35 30 30 30 31 46
45 31 35 30 30 41 33 37 31 44 36 30 30 35 30 38
42 34 30 30 30 35 34 44 39 34 30 30 30 31 33 30
30 42 46 45 35 41 30 30 30 30 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00
END OF COMMAND
initiator
Adds a new FC, iSCSI, or FCoE initiator; modifies the OS type of a discovered initiator; or removes
a logged-out initiator.
Authority
admin
Syntax
initiator
Keywords
Adds a new FC, iSCSI, or FCoE initiator. add
Modifies the OS type of a discovered initiator. mod
Removes a logged-out initiator. rm
Examples
The following example shows the initiator add command:
MPX200 <1> (admin) #> initiator add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Initiator Protocol (0=ISCSI, 1=FC, 2=FCOE) [ISCSI ] 1
Only valid FC name characters will be accepted. Valid characters include
alphabetical (a-z/A-Z), numerical (0-9).
FC Initiator Wwpn(Max = 64 characters) [ ]
50:05:07:68:02:20:13:49
Only valid FC name characters will be accepted. Valid characters include
alphabetical (a-z/A-Z), numerical (0-9).
FC Initiator Wwnn(Max = 64 characters) [ ]
50:05:07:68:02:20:13:50
OS Type (0=Windows, 1=Linux, 2=Solaris,
3=OpenVMS, 4=VMWare, 5=Mac OS X,
86 Command line interface