HP MPX200 Multifunction Router - Manual (Page 119)

0 FC 20:00:00:e0:8b:86:fb:9b,21:00:00:e0:8b:86:fb:9b
1 FC 20:00:00:e0:8b:89:17:03,21:00:00:e0:8b:89:17:03
2 ISCSI iqn.1986-03.com.hp:fcgw.mpx200.dm.initiator
nl Please select an Initiator from the list above ('q' to quit): 0
nl
Target(WWPN) (LUN/VpGroup) MappedId Serial Number/WWULN
------------ ------------- -------- -------------------
50:00:1f:e1:50:0a:e1:48 3/VPGROUP_2 3 PB5A8C3AATK8BW
nl
nl 60:05:08:b4:00:10:6b:ac:00:02:d0:00:00:5f:00:00
show iscsi
Displays the iSCSI port settings, including status, name, and IP addresses for a specified port, or
for all iSCSI ports known to the router if no port number is specified.
Authority
guest
Syntax
show iscsi
Examples
The following example shows the show iscsi command.
MPX200 <1> #> show iscsi
iSCSI Port Information
------------------------
iSCSI Port GE1
Port Status Enabled
Port Mode iSCSI
Link Status Up
iSCSI Name iqn.2004-08.com.qlogic:MPX200.0834e00021.b1
Firmware Revision 3.00.01.57
Current Port Speed 1Gb/FDX
Programmed Port Speed Auto
MTU Size Normal
Window Size 16777216
MAC Address 00-c0-dd-13-16-6c
IPv4 Address 10.10.10.83
IPv4 Subnet Mask 255.255.255.0
IPv4 Gateway Address 0.0.0.0
IPv4 Target TCP Port No. 3260
IPv4 VLAN Disabled
IPv6 Address 1 ::
IPv6 Address 2 ::
IPv6 Link Local fe80::2c0:ddff:fe13:166c
IPv6 Default Router ::
IPv6 Target TCP Port No. 3260
IPv6 VLAN Disabled
iSCSI Max First Burst 65536
iSCSI Max Burst 262144
iSCSI Header Digests Disabled
iSCSI Data Digests Disabled
Bandwidth, MB/sec 125
show logs
Displays log BridgeApp event information.
Authority
guest
Commands 119