HP MPX200 Multifunction Router - Manual (Page 88)

Keywords
Discovers the iSCSI target through the router’s iSCSI port. discover
Logs in the user to a specific discovered iSCSI target and lists all other targets discovered from the iscsi
discover
command.
login
Examples
The following example shows the iscsi discover command:
MPX200 <1> (admin) #> iscsi discover
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
nl
IP Address (IPv4 or IPv6) [0.0.0.0 ] 10.1.1.1
TCP Port No. [3260 ]
Outbound Port (1=GE1, 2=GE2, ...) [GE1 ]
Target CHAP (0=Enable, 1=Disable) [Disabled ]
The following example shows the iscsi login command:
MPX200 <1> (admin) (miguser) #> iscsi login
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
nl
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 iqn.2003-10.com.lefthandnetworks:qlogic:81:tp4-isns
Please select a Target from the list above ('q' to quit): 0
nl
Index IP Address
----- ----------
0 50.50.50.40
nl
Please select a IP Address from the list above ('q' to quit): 0
TCP Port No. [3260 ]
Outbound Port (1=GE1, 2=GE2, ...) [GE1 ]
Header Digest (0=Enable, 1=Disable) [Disabled ]
Data Digest (0=Enable, 1=Disable) [Disabled ]
lunigmap
Maps an iSCSI LUN to an initiator, or removes an iSCSI LUN mapping from an initiator.
Authority
Admin session
Syntax
lunigmap
Keywords
Maps an iSCSI LUN to an initiator using global mapping. add
Removes the mapping of an iSCSI LUN from an initiator. rm
Examples
The following example shows the lunigmap add command:
88 Command line interface