HP MPX200 Multifunction Router - Manual (Page 115)

Syntax
show compare_luns
Examples
The following shows an example of the show compare_luns command.
MPX200 <1> #> show compare_luns
Compare State Type ( 1=Running 2=Failed 3=Completed 4=Serial 5=All ) : 5
Index Id Creator Owner Type Status Job Description
----- -- ------- ------ ---- ------------------------ --------------------------------
0 0 1 1 Compare Verify Running ( 2%) IBM 2145-0:VPG1:001 to 3PARda..
Please select a Compare Job Index from the list above ('q' to quit): 0
Compare Information
-------------------
Job Owner:Id:UUID b1:0:1105F00605b1716
Job Description IBM 2145-0:VPG1:001 to 3PARdata VV-1:VPG1:000
Group Name Group 0
Priority Not Applicable
Compare Status Verify Running
I/O Size 64 KB
Compare State 2% Complete
Compare Performance 102 MBps
Compare Curr Performance 102 MBps
Job ETC 0 hrs 1 min 37 sec
Start Time Fri Nov 2 14:13:59 2012
End Time ---
Delta Time ---
Source Array IBM 2145-0
Source Lun VPG:ID 1:1
Source Lun WWULN 60:05:07:68:02:80:80:a7:cc:00:00:00:00:00:13:5e
Source Serial Number 0200a02029f3XX00
Source Lun Size 10.000 GB
Source Lun Start Lba 0
Source Lun End Lba 20971519
Destination Array 3PARdata VV-1
Destination Lun VPG:ID 1:0
Destination Lun WWULN 50:00:2a:c0:00:02:1a:f8
Destination Serial Number 01406904
Destination Lun Size 10.000 GB
Destination Lun Start Lba 0
Destination Lun End Lba 20971519
Compared Data Size 20971520 Blocks (1 Block is of 512 bytes)
show dml
Lists all configured DMLs and shows DML-specific attributes such as LUN type (master, for example),
LUN serial number, LUN state, data extents, and more. The first output line identifies the master
blade.
Lists all configured DMLs and shows DML-specific attributes.
Authority
miguser
Syntax
show dml
Examples
The following example shows the show dml command:
nl
MPX200 <1> (miguser) #> show dml
nl
Current Master Blade Blade-2
nl
Data Management LUN Information
-------------------------------
Symbolic Name Data Mgmt Lun 0::1
Commands 115