HP MPX200 Multifunction Router - Manual (Page 138)

Keywords
Adds the target presentation. add
Removes the target presentation. rm
Examples
The following example shows the targetmap add command using the automap option:
nl
nl
MPX200 <1> (admin) #> targetmap add
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:48
1 50:00:1f:e1:50:0a:e1:40,50:00:1f:e1:50:0a:e1:4c
2 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:18
3 50:00:1f:e1:50:0a:37:10,50:00:1f:e1:50:0a:37:1c
4 50:06:01:60:c1:e0:49:2e,50:06:01:62:41:e0:49:2e
5 50:06:01:60:c1:e0:49:2e,50:06:01:6a:41:e0:49:2e
6 50:0a:09:80:88:cd:63:f5,50:0a:09:81:88:cd:63:f5
7 50:0a:09:80:88:cd:63:f5,50:0a:09:81:98:cd:63:f5
nl
Please select a target from the list above ('q' to quit): 6
Index (VpGroup Name)
----- --------------
0 GLOBAL
1 VPGROUP_1
2 VPGROUP_2
3 VPGROUP_3
4 VPGROUP_4
nl Please select a VpGroup from the list above ('q' to quit): 0
nl Index (IP/WWNN) (MAC/WWPN) (Portal)
----- ----------- ------------ --------
0 20:00:00:c0:dd:13:2c:60 21:00:00:c0:dd:13:2c:60 FC1
1 20:00:00:c0:dd:13:2c:61 21:00:00:c0:dd:13:2c:61 FC2
nl Please select a portal from the list above ('q' to quit): 0
Do you want to automap the selected target (Yes/No) [Yes ]
All attribute values that have been changed will now be saved.
The following example shows the targetmap rm command:
MPX200 <1> (admin) #> targetmap rm
Warning: This command will cause the removal of all mappings and hosts
will loose access to disks.
nl
Index State VpGroup Port (WWNN,WWPN/iSCSI Name)
----- ----- ------ ---- ----------------------
0 Online 1 FC1 20:06:00:c0:dd:13:2c:c4,21:06:00:c0:dd:13:2c:c4
1 Online 1 FC1 20:04:00:c0:dd:13:2c:c4,21:04:00:c0:dd:13:2c:c4
2 Online 1 FC1 20:05:00:c0:dd:13:2c:c4,21:05:00:c0:dd:13:2c:c4
nl
Please select a target from the list above ('q' to quit): 0
All attribute values that have been changed will now be saved.
138 Command line interface