HP MPX200 Multifunction Router - Manual (Page 82)

nl All attribute values for that have been changed will now be saved.
The following example shows the compare_luns stop command:
nl
MPX200 <1> (miguser) #> compare_luns stop
nl
nl
Job Type Status Job Description
ID
nl --- ---- ------------------------ -------------------------------------
0 Offline Verify Running HP HSV200-0:0001 to DGC RAID-1:0000
nl
Please select a Job Id from the list above ('q' to quit): 0
nl
All attribute values for that have been changed will now be saved.
dml
Adds and deletes DMLs. To see a list of all configured DMLs and their DML-specific attributes, see
“show dml” (page 115) .
Authority
miguser
Syntax
dml
Keywords
Lists attributes for LUNs that are part of other jobs or already used as DMLs. Issue this command to
avoid inadvertently using these LUNs for creating a DML. The MPX200 rejects such LUNs (if selected) create
and fails the DML create operation. The first DML is treated as the master DML and cannot be deleted
until other DMLs are deleted. LUNs used as DMLs must have a minimum size of 50GB for the dml
create
command to succeed; however, the recommended minimum size is 100GB.
Lists all configured DMLs. The first DML is considered to be the master DML and cannot be deleted
until all other DMLs are deleted. delete
Examples
The following example shows the dml create command:
nl
nl
MPX200 <1> (miguser) #> dml create
Data Management Lun type (1 = Remote Migration) [ 1 ]
Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type
----- --------------------------------- ------------------ -----------
0 50:06:01:62:41:e0:49:2e, 82-01-00 DGC RAID-2 Src+Dest
1 50:00:1f:e1:50:0a:e1:48, 82-0c-00 HP HSV200-0 Src+Dest
2 50:00:1f:e1:50:0a:37:18, 82-04-00 HP HSV210-3 Src+Dest
3 50:0a:09:81:88:cd:63:f5, 61-0b-00 NETAPP LUN-3 Src+Dest
4 iqn.2001-05.com., 20.20.20.2 EQLOGIC 100E-00-4 Src+Dest
5 iqn.2001-05.com., 20.20.20.2 EQLOGIC 100E-00-5 Src+Dest
6 iqn.2001-05.com., 20.20.20.2 EQLOGIC 100E-00-6 Src+Dest
7 iqn.2001-05.com., 20.20.20.2 EQLOGIC 100E-00-7 Src+Dest
nl
Please select a Target from the list above ('q' to quit): 1
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
nl 2 VPGROUP_2
3 VPGROUP_3
4 VPGROUP_4
Please select a VPGroup from the list above ('q' to quit): 1
LUN Vendor LUN Size( GB) Attributes Serial Number/WWULN
--- ------ -------------- ---------- -------------------
5 HP 100.000 PB5A8C3AATK8BW
60:05:08:b4:00:10:6b:ac:00:02:a0:00:00:af:00:00
nl
nl
Please select a LUN from the list above ('q' to quit): 5
Successfully initiated data management lun creation
The following example shows the dml delete command:
82 Command line interface