HP MPX200 Multifunction Router - Manual (Page 61)

1. Open the Serial Data Migration Jobs Options dialog box, see Figure 27 (page 61) using one
of these options:
•
On the Wizards menu, click Start Serial Schedule Job(s).
•
Right-click a serial scheduled job, and then click Start Serial Scheduled Jobs.
nl This option immediately starts the selected job, unless there are other jobs configured
with a lower priority that must complete migration first.
Figure 27 Serial data migration jobs options dialog box
2. In the Serial Data Migration Jobs Options dialog box under Scheduling Type, click either Start
Now or Schedule for later.
3. If you choose Schedule for later, enter the Start Time and Start Date.
4. To save your settings, click Apply.
5. On the Data Migration Security Check dialog box, enter your security password (the default
is migration), and then click OK.
The serial scheduled jobs starts when you have scheduled.
Viewing the status of data migration jobs
The right pane of the HP mpx Manager displays the job status for all active and completed data
migration jobs that you have configured.
To view the status of data migration jobs:
1.
In the left pane, click the Services tab.
2. In the left pane, expand a blade node, and then click the Data Migration Jobs node.
3. In the right pane, click the Active Data Migration Jobs tab.
The Active Data Migration Jobs page shows a summarized view of all active jobs, including
the following columns of information:
% Completed Group Name
Start Time Job ID
End Time Job Name
Source Array–LUN Type
Dest Array–LUN Status
Job ETC (expected time of completion)
NOTE: You can also pause, resume, stop, start, and remove active data migration jobs
using the shortcut menu on the Active Data Migration Jobs page. For more information on job
actions, see
“Rescanning Targets” (page 45) .
Viewing the status of data migration jobs 61