HP MPX200 Multifunction Router - Manual (Page 135)

Authority
guest
Syntax
show targets
Examples
The following example shows the show targets command:
nl
nl
MPX200 <1> #> show targets
nl
Target Information
--------------------
WWNN 50:08:05:f3:00:1a:15:10
WWPN 50:08:05:f3:00:1a:15:11
Port ID 02-03-00
State Online
WWNN 50:08:05:f3:00:1a:15:10
WWPN 50:08:05:f3:00:1a:15:19
Port ID 02-07-00
State Online
The following example shows the show targets command with imported targets:
MPX200 <1> #> show targets
Target Information
--------------------
WWNN 50:05:07:68:02:00:13:47
WWPN 50:05:07:68:02:20:13:47
Port ID 01-05-00
State Online
WWNN 50:05:07:68:02:00:13:46
WWPN 50:05:07:68:02:20:13:46
Port ID 78-00-00
State Online
WWNN 20:04:00:a0:b8:2a:3f:78
WWPN 20:45:00:a0:b8:2a:3f:78
Port ID 78-04-00
State Online
WWNN 50:0a:09:80:88:cd:63:f5
WWPN 50:0a:09:81:88:cd:63:f5
Port ID 78-0c-00
State Online
WWPN 50:05:07:68:02:30:13:04 FC [Imported]
State Online
IP Address 40.40.40.40 (Logged In --> GE1)
WWPN 50:05:07:68:02:40:13:05 FC [Imported]
State Online
IP Address 40.40.40.40 (Logged In --> GE1)
show vpgroups
Lists the status and WWPN for each VP group.
The router’s FC ports can present four virtual ports (if enabled) to zone with FC targets and allow
the target to expose more LUNs to the router. The router provides the VP group by combining virtual
port entities from each FC port. Every VP group includes one virtual port from each FC port. Because
there are four virtual ports per FC port, there are four VP groups.
Authority
guest
Commands 135