HP MPX200 Multifunction Router - Manual (Page 127)

Seq id: 2 : Job Type: Migration (Online) : miguser :ADDED : MigrOwner 1 : JobId
0( Online) of group Group 0 with priority 0 from Target NETAPP LUN-0 Lun NETAPP
LUN hpTQaF01ICU6(0) StartLba 0 to Target NETAPP LUN-0 Lun NETAPP LUN
hpTQaF01ICtb(1) StartLba 0 with migration size 2.00 GB (4194304 Blocks)
nl Mon Jan 12 06:42:44 2011
Seq id: 3 : Job Type: Migration (Online) : miguser :STARTING MIGRATION :
MigrOwner 1 : JobId 0( Online) of group Group 0 with priority 0 from Target
NETAPP LUN-0 Lun NETAPP LUN hpTQaF01ICU6(0) StartLba 0 to Target NETAPP LUN-0
Lun NETAPP LUN hpTQaF01ICtb(1) StartLba 0 with migration size 2.00 GB (4194304
Blocks)
nl Mon Jan 12 06:43:22 2011
Seq id: 4 : Job Type: Migration (Online) : miguser :FAILED: Error: Read Error :
MigrOwner 1 : JobId 0( Online) of group Group 0 with priority 0 from Target
NETAPP LUN-0 Lun NETAPP LUN hpTQaF01ICU6(0) StartLba 0 to Target NETAPP LUN-0
Lun NETAPP LUN hpTQaF01ICtb(1) StartLba 0 with migration size 2.00 GB (4194304
Blocks)
nl Tue Jan 13 02:49:29 2011
Seq id: 5 : Job Type: Migration (Online) : miguser :REMOVED : MigrOwner 1 :
JobId 0( Online) of group Group 0 with priority 0 from Target NETAPP LUN-0 Lun
NETAPP LUN hpTQaF01ICU6(0) StartLba 0 to Target NETAPP LUN-0 Lun NETAPP LUN
hpTQaF01ICtb(1) StartLba 0 with migration size 2.00 GB (4194304 Blocks)
The following example shows how to view the data migration log in the CLI:
nl MPX200 <1> #> show migration_logs 5
Thu Sep 10 13:15:49 2011
Seq id: 645 : Job Type: Migration : miguser :COMPLETED : JobId 0(Offline) of
group Group 0 with priority 0 from Target HP HSV200-0 Lun
60:05:08:b4:00:07:59:a4:00:02:a0:00:00:7e:00:00(6) StartLba 0 to Target HP
HSV200-0 Lun 60:05:08:b4:00:07:59:a4:00:02:a0:00:00:83:00:00(7) StartLba 0
with migration size 5.00 GB (10485760 Blocks)
nl Thu Sep 10 13:33:16 2011
nl Seq id: 646 : Job Type: Migration : miguser :ACKNOWLEDGED : JobId 0(Offline) of
group Group 0 with priority 0 from Target HP HSV200-0 Lun
60:05:08:b4:00:07:59:a4:00:02:a0:00:00:7e:00:00(6) StartLba 0 to Target HP
HSV200-0 Lun 60:05:08:b4:00:07:59:a4:00:02:a0:00:00:83:00:00(7) StartLba 0
with migration size 5.00 GB (10485760 Blocks)
Thu Sep 10 13:38:37 2011
Seq id: 647 : Job Type: Migration : miguser :ADDED : JobId 0(Offline) of group
Group 0 with priority 0 from Target HP HSV200-0 Lun Invalid Wwuln(6) StartLba 0
to Target HP HSV200-0 Lun Invalid Wwuln(7) StartLba 0 with migration size 5.00
GB (10485760 Blocks)
Thu Sep 10 13:38:37 2011
Seq id: 648 : Job Type: Migration : miguser :STARTING MIGRATION : JobId
0(Offline) of group Group 0 with priority 0 from Target HP HSV200-0 Lun Invalid
Wwuln(6) StartLba 0 to Target HP HSV200-0 Lun Invalid Wwuln(7) StartLba 0 with
migration size 5.00 GB (10485760 Blocks)
Thu Sep 10 13:39:45 2011
Seq id: 649 : Job Type: Migration : miguser :COMPLETED : JobId 0(Offline) of
group Group 0 with priority 0 from Target HP HSV200-0 Lun Invalid Wwuln(6)
StartLba 0 to Target HP HSV200-0 Lun Invalid Wwuln(7) StartLba 0 with
migration size 5.00 GB (10485760 Blocks)
show migration_luninfo
Provides the current status and path information for any array LUN. Use this command to check
the usability of a path in failover scenarios. The paths specified as passive are not used by data
migration jobs if the current path fails. The passive path is capable only of reading the LUN size,
vendor, and product information but cannot perform any I/O operation.
Authority
guest
Syntax
show migration_luninfo
Examples
The following example shows the show migration_luninfo command.
nl
nl
MPX200 <1> #> show migration_luninfo
Index WWPN, PortId/ iScsiName, Ip Add Symbolic Name Target Type
----- --------------------------------- -------------------- -------------
Commands 127