HP MPX200 Multifunction Router - Manual (Page 134)

---------------------
Job Owner:Id:UUID b1:1:1105F00605b1717
Job Description IBM 2145-0:VPG1:000
Group Name Group 0
Scrubbing Type Scrubbing
Priority Not Applicable
Scrubbing Status Running
I/O Size 64 KB
Scrubbing Algorithm ZeroClean [ 2 Pass ]
Scrubbing CurrentPass 1
Scrubbing State 17% Complete
Scrubbing Performance 273 MBps
Scrubbing Curr Performance 273 MBps
Job ETC 0 hrs 1 min 56 sec
Start Time Fri Nov 2 14:15:36 2012
End Time ---
Delta Time ---
Array IBM 2145-0
Lun VPG:ID 1:0
Lun WWULN 60:05:07:68:02:80:80:a7:cc:00:00:00:00:00:14:ec
Source Serial Number 0200a02029f3XX00
Lun Size 11.000 GB
Start Lba 0
End Lba 23068671
Scrubbing Data Size 23068672 Blocks (1 Block is of 512 bytes)
show system
Displays system details.
Authority
guest
Syntax
show system
Examples
The following example shows the show system command.
nl
MPX200 <1> #> show system
nl
System Information
--------------------
Product Name MPX200
Symbolic Name Blade-1
Target Presentation Mode Auto
Lun Mapping Enabled
Controller Lun AutoMap Disabled
Target Access Control Enabled
Time To Target Device Offline 0
Serial Number 0851E0020
HW Version 20694-03
SW Version 3.3.0.0rc4l
Boot Loader Version 0.97.0.4
BIOS Version 6.0.0.3
No. of FC Ports 2
No. of iSCSI Ports 2
Log Level 0
Telnet Enabled
SSH Enabled
FTP Enabled
Temp (Front/Rear/CPU1/CPU2) 39C/26C/31C/31C
Uptime 0Days0Hrs24Mins52Secs
show targets
Displays the WWPN and WWNN for all targets that are zoned in with the router ports. If one or
more data LUNs are exposed to the router ports from the target, no information is shown.
134 Command line interface